English
The new immergas hydro fan coil serier; It is designed and manufactured to provide optimum temperature control in every room with combi boilers, hybrid systems,integrated systems or heat pupms.It offers heating/cooling solutions in homes,stores,shopping malls,hospitals,hotels and all projects with three new models and 12 different capacities.It can be used safely in individual or central systems.Provides ease of assembly.It works highly efficiently and extremely quietly.
Hydro 3 and 4 series can be mounted on the Wall with remote control, split type, hydro fs series is floor,ceiling and Wall type, and hydro in series is recessed,built-in type. Each model has different heating and cooling power and can be provided in several different versions. Will offer unparalleled facility solutions both in new and old buildings.
Immergas, fan coils, are designed with great attention to small details. Designers, architects and builders can choose from many different capacities and specifications of fan coils that provide comfort and aesthetic. Compatible with any pre-made or planned design. It can be easily integrated into all kinds of heating and cooling system with its wide range of accessories and electronic control systems.
Fan coil device, also known as blown convector or living room type hot air device,is a heating and cooling element with a radial fan and filter that provides air movement at the top and bottom of the serpentine from the finned pipes.
The air sucked by the fan passing through the filter is blown into the environment by licking the sepantine surface. In the fan coils, the air licking the sepantine surface will condense and condensation water will be collected in the condensation pan under the device. Condensate water is collected and discharged by drainage pipes.They are used in multi-storey Office buildings,hotels,motels and hospitals.
In primary air fan coil systems applications, the fresh air that people need is prepared in a primary air plant. 100% outdoor air or, in some applications, mixed air is heated and cooled to room temperature in the primary air plant. The air at room temperature is blown to the suction mouth of the fancoil or directly to the room through the vents.
Another primary air application is to supply the fresh air of the fan coil through the hole or grille opened on the outer Wall behind it.
2 pipe or 4 pipe fancoil systems are applied in primary air and purely water fancoil systems.
The feature of fancoil systems is that they are modular systems that can operate independently. In terms of independence and modularity, it has proven itself in various applications made untill today.
In the 2-pipe fancoil, hot water (for heating) is passed through the coil in winter and cold water (for cooling) in summer.In short,the 2-pipe fan coil system either heats or cools depending on the season.
Although there are many application areas in our country.its use in the world is declining.
1) Zones can be controlled independently.
2) Since it does not create a physical connection with the neighboring spaces, the air circulation is unique to the space and positively affects the human comfort as it provides movement in the air of the place.
3) There is no risk that the negative effects of different places such as smell and sound will affect each other.
Maximum heat load can be met with maximum audible and latent heat again.
1) They do not respond to temperature differences in transitional seasons and external environmental zones.cannot provide the desired comfort.
2) Condensation pans and pipes, which are open to the environment and therefore to dust,should be washed periodically.
3) Air filters need to be cleaned frequently.
4) All water systems require more maintenance than central systems with air conditioning and since the devices are in the same place with the people who are the users, they require good operating organization.
In this system, there are 2 separate coils, both heating and cooling coils, in the terminal unit fan coil unit.
In this system, there is no need for zoning for primary fresh air or secondary water circuits.
In 4-pipe fan coil systems, 4 pipes are used as cold water flow, cold water return, hot water flow and hot water return pipes.There is also a drainage pipe.The feature of the system is that we reach the comfort conditions designed in regions that feel different temperatures in the same time period.Namely; It is not possible for us to perform heating in an external perimeter or zone and cooling in anothr external environment front or zone.
1) Compared to the 2-pipe system,it is quite flexible and responds instantly to load changes.
2) There is no need to change-over in summer and winter.
3) Higher efficiency and lower operating costs.
4) There is no problem in its operations, it is simple.
Investment cost is high. Fancoil systems control fancoil devices can be controlled in several ways. The control of the capacity to be obtained from a fancoil devices due to its mechanical structure is provided by the control of the flow and temperature of the air and water,which form the two sides of the energy transfer on the device.
For this purpose, the speed of the fan, which adjusts the fluid flow rate with 2-way on/off, 2-way proportional an 3-way proportional control valves on the water side of the fancoil system, and which is controlled by the room thermostat on the air side, is controlled.
The most convenient and economical solution is to control the fan with a 3-speed room thermostat with room type summer and winter position.
However, if we do not control the flow, the fancoil will work like a convector when the fan stops.However, in primary air systems, in applications where the primary air is applied directly to the suction port of the FCU,even though there is no load in the room, the FCU will further cool the primary air and transmit it in the room environment and will cause subcooling.
HYDRO 3 Fan Coil series are wall mounted, remote controlled split type fan coils.ıt has a power of 2,94 Kw in heating and 2,7 Kw in cooling.It is designed to transfer the energy in hot or cold water to the ambient air.ıt offers the most ideal solutions especially for hybrit systems and integration with heat pump systems.
Equipped with an extremely quiet fan.ıt can work at three different speeds as well as in automatic mode when requested.The fan blades can be oriented horizontally and vertically.With the optional LCD digital control and microprocessor control that can be connected to the device,it provides high comfort and ease of use in any environment. High efficiency and saving are quaranteed with sensors that continuously measure water and air temperature.ıt can be used in in all installation types with a standart 3-way valve and auxiliary demand contact for by-pass.Equipped with condensate drain and a vent valve. Hydraulic connections are on the right side of the device as standard.can be turned to the left.
The outer cover of the HYDRO 3 is made of ABS plastic with high mechanical strength, resistant to wear and an extremely stylish and aesthetic design.With its large surface water/air heat transfer exchanger, it meets the expectations of high efficiency and savings.
HYDRO IN 200 Fan Coil Series,ıt responds to every design need with the possibility of recessed mounting on the wall,ceiling and suspended ceiling.ıt has a depth of only 12.6 cm. ıt can be mounted vertically on the wall and horizontally on the ceiling.They are bottom suction, top blowing type fan coils.ıt has a power 1,89 kw in heating and 0,76 kw in cooling.ıt is designed to transfer the energy in hot or cold water to the ambient air.It offers integrated system solutions especially with central heating/cooling systems,individual heating/cooling systems,hybrid systems and heat pump systems.
It is equipped with and extremely quiet, horizontal bladed DC inverter engine fan.ıt can work in 3 different speeds and automatic mode.With the optional LCS digital control and microprocessor control that can be connected to the device, it provies high comfort and ease of use in any environment.Equipped with condensate drain and air vents.Hydraulic connections are on the left side of the device as standard.ıt can be turned to the right if desired.Wıth optional control systems,30 fan coils can be controlled from a single center.ıt provides ease of assembly with its rich range of accessories.
HYDRO IN 200 ıt is produced accident-free for built-in installation.ıt is extremely stylish and elegantly designed.with its depth of only 12,6cm, it does not take up space and allows creating aesthetic spaces.Large-area water/air heat transfer exchanger and high efficiency sensors that measure water/air temperature continuoysly prevent the fan from running continuously and quarantee high savings.
HYDRO FS200 Fan Coil Series;These are bottom suction,top blowing fan coils that can be mounted on the wall and on the ceilingand floor with special accessories when desired.ıt has a power of 1,89 kw in heating and 0,76 kw ın cooling.ıt is designed to transfer the energy in hot or cold water to the ambient air.ıt offers integrated system solutions especially with central heating/cooling systems, individual heating/cooling systems,hybrid systems and heat pump systems.
Equipped with an extremely quiet horizontal blade fan with DC inverter engine.it can work at three different speeds and in automatic mode.With optional LCD digital display air conditioner and microprocessor control that can be mounted on the device,it provides high comfort and ease of use in any environment.Equipped with condensate drain and air vents.Hydraulic connections are on the left side of the device as standard.With optional control systems,30 fancoil can be controlled from a single center.
The outer sheets of HYDRO FS200 are coated with RAL 9003 with epoxy powder paint,which has high mechanical strength and is resistant to wear.ıt is extremely stylish and elegantly designed.with its depth of only 15 cm , it does not take up space and allows creating aesthetic spaces.High efficiency with its large surface water/air hear transfer exchanger, sensors that measure water/air temperature continuously, prevent the fan from running continuously and quarantee high savings.
The new immergas HYDRO fan coil series; it is designed and manufactured to provie optimum temperature control ın every room with combi boilers,hybrid systems, integrated system or heat pumps.with three new models and 12 different capacities,it offers heating/cooling solutions in homes,sores, shopping malls,hospitals,hotels and all projects.ıt can be used safely in individual or central systems.Provides ease of assembly.It works highly efficiently and extremely quietly.
HYDRO 3 and 4 series can be mounted on the wall with remote control,split type,HYDRO FS series floor,ceiling and wall tyoe, HYDRO IN series is built-in,built-in type.Each model is available in many different versions, with different heating and cooling power.Offers unique plumbing solutions in both new and old buildings.
Immergas fan coils are designed with great attention to small details.Designers, architects and builders can choose from a variety of different capacities and specifications of fan coils that provide comfort and aesthetics.Compatible with any previously made or planned design.ıt can be easily integrated into all kinds of heating and cooling systems with its wide range of accessories and electronic control systems.
Copyright 2021 Netsa Havuz. Tüm Hakları Saklıdır. Bacom Bilgisayar